What Does it Mean to Screen And Recoat Hardwood Floors?

Screening and recoating a hardwood floor
Recoat hardwood floors
Recoat Hardwood Floors

Screening and recoating your hardwood floors can be an effective way to restore their shine without needing to sand them down. Screening hardwood floors involves removing the top layer of polyurethane, but not the bare wood underneath.

This helps remove any dullness or light scratches from the surface of your floor. Recoating follows this process and involves applying a new coat of oil or water-based poly, depending on what’s on the floor now, which helps protect the raw wood from further damage.

It is important to note that this process does not involve sanding your floors, only replacing the protective layer that was removed. Depending on the type of hardwood flooring and the condition it’s in, this can be an easy and cost-effective way to refresh your floors.

It is best to consult with a hardwood floor company like Sandless in Seattle, Washington, who can assess the condition of your floors before proceeding.

This will ensure that your wood flooring receives the proper care it needs and that any potential issues are addressed promptly. With the right care and attention, you can keep your floor looking beautiful for years to come.

What Benefits Do Screening And Recoating Offer?

woman and child sitting on their newly screened and recoated hardwood floor in Seattle

Screening and recoating your floors offer various benefits that make it a popular choice for restoring the shine of your floor. It does not involve removing any wood, making it a less expensive process.

It can also be faster than sanding and refinishing, as you do not need to wait for the floors to dry before recoating them. Since this process doesn’t involve hardwood floor sanding, it has less of an environmental impact too.

Not to mention, this process will help preserve the condition of your floor and protect it from further damage.

When you screen and recoat your entire floor, it greatly improves your old flooring without investing in a more costly and time-consuming project.

However, it’s essential to consult with an expert before beginning any work on wood flooring to ensure that the job is done correctly. With the right care and attention, you can keep your existing floors looking gorgeous for years to come.

What Are Some Tips For Maintaining Your Hardwood Floors?

homeowner in Washing State maintaining her hardwood floor

Keeping your floors beautiful doesn’t need to be complicated – with some simple tips for daily maintenance and a regular maintenance screening program, you can extend the life of your flooring for many years.

If you want to keep your floors looking beautiful, then here are some tips you should follow when maintaining them:

  1. Use thick, soft pads to prevent deep scratches when you are moving your furniture.
  2. Putting area rugs, mats, and carpets over your floor will help protect it from dirt and wear. You must also see to it that you clean your floor regularly using a dry mop or vacuum. Avoid wet cleaning methods as they can damage your wood floor’s finish.
  3. Recoat your hardwood floors every 2-3 years to keep their top layer in good condition.
  4. Only use good quality floor polish to maintain the existing finish of your flooring.

Following these simple steps will help ensure that you get the most out of your existing floor for many years to come.

By investing in regular floor screening and recoating services, you’ll guarantee that your wood floors look their best for many years to come.

It’s also important to follow tips from hardwood flooring blogs, so you can enjoy beautiful floors without having to worry about costly repairs or replacements.

With the right care and attention, your wood floors can remain a source of beauty and pride in your home for years to come.

Don’t hesitate to contact a hardwood floor refinishing company in Seattle, Washington, if you have any questions or concerns about screening and recoating your hardwood floor.

A reputable hardwood floor company will be able to provide valuable advice on what is best for your flooring needs and guide you through the process so that you can get the most out of your investment. With their help, you’ll be able to keep your existing floors looking fabulous for many years!

How to Maintain Prefinished Hardwood Floors

man installing a prefinished hardwood floor

Maintaining prefinished floors is an important part of keeping them looking beautiful and lasting longer. To keep your floor in top condition, you can perform a screening and recoat every few years.

This process involves several steps that must be taken to ensure the job is done properly.

The first step is to remove any existing oil-based polyurethane coating or water-based coating with either a chemical stripper or by employing a screening pad.

The old finish will need to be abraded before it can be removed completely. All residue from the entire floor must be carefully removed so they are clean and the fresh coat can adhere properly.

Once this is done, a new coat of poly should be applied for a smooth finish.

The screen and recoat process is an important part of hardwood floor maintenance and can help keep your floors looking beautiful for years to come.

By following these steps, you’ll ensure your hardwood floor looks its best! If you’re not comfortable performing this task yourself, hire Sandless in Seattle to do it for you. We have the best tools and skills to get the job done correctly.

Can You Screen and Recoat Engineered Floors?

engineered floor being installed in Seattle

Yes, you can! Engineered floors are just as easy to screen and recoat as solid hardwood floors. We use the exact same process—the first step is removing the old polyurethane coating with a chemical stripper and professional floor buffer with a screening pad (again, no sandpaper here).

Once we’ve abraded the floors, removed the old coating, and cleaned up all the residue, we apply a new coat of polyurethane to give your floors a nice smooth finish.

Can you recoat any hardwood floor?

damaged wood floor that needs a full sanding

The short answer is yes; recoating can extend the life of any wood floor. However, there are a few factors to consider before proceeding with this process.

If the existing finish is in bad shape or if it has been applied too thickly, then a simple recoat may not be enough. In these cases, it’s best to speak with an expert and have them evaluate the floors first before deciding on the best course of action.

A professional screen and recoat job can transform your floors from dull and lifeless to shiny and fresh looking again.

It’s important to remember that hardwood flooring should be regularly maintained, which includes sanding and refinishing every 3–7 years if you don’t screen and recoat every few years, depending on foot traffic and other factors.

Doing so will help keep your floors looking their best for years to come. So, if you are considering a recoat for your hardwood floors, be sure to speak with an expert to get the most out of your investment!

How long does it take to screen and recoat a hardwood floor?

a wood tech cleaning a wood floor to prepare for screening and recoating

The length of time it will take to screen and recoat a hardwood floor depends on the size of the floor, how much traffic it gets, and what type of finish is currently on it.

Generally speaking, you can expect the process to take one day for an average-sized room.

Screening and recoating typically involve preparing the surface by removing the top coat of polyurethane, then cleaning the surface before adding a new coat of polyurethane. This is usually completed in less than a day.

To ensure that you get the best possible outcome for your hardwood floors, it’s always recommended to speak with an experienced professional before deciding on any refinishing job.

A good contractor will be able to assess your flooring needs and provide advice on how long it should take to complete the project based on the condition of your floors.

With their help, you’ll be able to enjoy gorgeous floors without having to worry about costly repairs or replacements.

Are there any other steps involved in the screen and recoat process?

homeowner moving a couch to get ready for a screen and recoat

Yes, several steps go into a screening and recoating job.

First, we need to prepare the floor by removing all the furniture and rugs so that we can access the entire surface area.

Then we use a chemical stripper or professional sanding method to remove the existing finish before vacuuming up all residue. After that, we apply one to two coats of polyurethane sealer to protect and enhance the beauty of your floors.

Nobody wants dull or scratched hardwood floors – but luckily, screening and recoating can help restore their luster. It is not only cost-effective, but it is also less invasive than sanding and refinishing and helps protect your floor from further damage.

Contact Sandless in Seattle if you have any questions or concerns to ensure your screening and recoating job is done correctly.

Sanding hardwood floors down to bare wood is not always necessary; that is the main reason we offer screening and recoating services in the Greater Seattle, Washington, area. So, if you want your floors to look new again without sanding them, contact Sandless in Seattle.